Aircraft PRM Medical Lift features
(1) The chassis adopts the Qingling Class II chassis, which has strong bearing capacity and good maneuverability.
(2) The most scientific and reasonable fork structure, the fork adopts a large tilt Angle piggyback oil cylinder.
(3) The upper and lower frame structure of the lifting device with widened design has very good stability.
(4) The hydraulic system uses imported electromagnetic reversing valve, two-way hydraulic lock, emergency electric pump, emergency manual pump, etc. The cylinder uses domestic high-quality products, and the key oil seal wearing parts in the cylinder are imported.
(5) The emergency measures are complete, which can ensure the safety of the operation of the boarding vehicle for passengers with limited mobility.
(6) The electrical system design is perfect, all kinds of functions are complete, can effectively prevent all kinds of misoperation, so that the equipment is free from damage.
(7) Integrated circuit board and relay combined control, advanced and reliable control system.
(8) The use of multi-layer progressive tail ladder, easy to operate the car body, safe and reliable.
(9) Rich configuration options to meet different customer needs.
Aircraft PRM Medical Lift Technical parameters
Interior dimensions (length × width × height) mm: 6570×2200×2100
Fixed platform (L x W) mm: 2300 x 2000
Shrink platform (length × width) mm: according to customer requirements
Telescopic platform telescopic distance: 0-600
Platform working height (minimum) mm: 2200
Platform working height (Max.) mm: 6000
Rear lifting platform lifting height mm: 0-1500
The maximum load capacity of the car body ㎏ : 3000
Fixed platform rated load ㎏ : 1200
The rated load of the telescopic platform ㎏ : 800
After the platform rated load ㎏ : 500
Driving range km: 210
Charge time h: 2.5
Rated power kw/r/min: 75/2000
b. Protection level IP: 67
Battery type: Ningde era lithium iron phosphate
Total energy storage kWh: 106.96
Charging mode: National standard DC charging interface (9 core).
Spraying requirements: Complete the exterior logo and logo painting work in the factory according to the tenderer's requirements.
