CN
Home » News » Industry News » Electric Passenger Steps body introduction

Electric Passenger Steps body introduction

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

The JSTY5070KTE Electric Passenger Steps are airport-specific devices powered by electricity for passengers to get on and off the aircraft.

Applicable models: ARJ 21 aircraft, A320,A321,B737 series models, etc


Electric Passenger Steps The ladder body consists of a fixed ladder, a sliding ladder and a middle post. The bottom end of the fixed ladder is hinged together with the chassis frame through the shaft, and the upper part is composed of two side sliding blocks and sliding ladder. The bottom of the middle column is hinged together with the chassis skeleton through the shaft, the side and back are hinged with the chassis skeleton through two pull rods and slide oil cylinder, and the upper part is composed of a sliding structure through the pulley and sliding upper chute. The pitch Angle of the ladder body is changed by the lifting of the middle column, and the height of the front platform of the telescopic slide ladder is changed by the telescopic slide ladder oil cylinder to adapt to the height of the hatch door of different models.


The fixed ladder assembly is mainly composed of fixed ladder welding assembly, side plate fixing rod, aluminum pedal, fixed ladder semi-circle mounting plate, anti-collision rubber cylinder and other parts. Expansion ladder assembly is mainly composed of expansion ladder welding assembly, side plate fixing rod, aluminum pedal, fixed ladder anti-friction block and other parts. Both sides of the fixed ladder and the sliding ladder are equipped with a side board composed of aluminum-plastic plate or stainless steel, the side chord plate is equipped with a step light, the upper side of the side board is equipped with a stainless steel handrail, the net width of the ladder body is 1500mm, and the height of the side chord plate handrail is 1100mm. The pedal is made of aluminum profile, non-slip design, does not clip the female heel, and is covered with anti-slip rubber, anti-slip rubber, wear-resistant and sunscreen


Product standard

IATA AHM 920 Motorized passenger elevator function details

MH/T6029-2014   Passenger Stairs

EN12312-1 Specific requirements for aviation ground equipment -1 Passenger stairway

GB/T 18488-2006 Electric motor and controller thereof for electric vehicles

GB/T 24347-2009 DC/DC converter for electric vehicles

GB/T 18384-2001 Safety requirements for electric vehicles

GB/T 18487-2001 Electric vehicle conduction charging system

GB/T 20234-2015 Connecting devices for conductive charging of electric vehicles

GB/T 27930-2011 Communication protocol between electric vehicle non-on-board conduction chargers and battery management systems

DB11/Z993-2013 Technical specification for electric vehicle Remote service and management system


Electric Passenger Steps body introduction

Relation

Navigation

Contact Us

Jiangsu Tianyi Aviation Industry Co., Ltd.
 
Factory: No.2 Hang Kong Road High-tech zone, Jianhu county, Yancheng City, Jiangsu Province, P.R.China
 
Shanghai Office: Room 1103, Building 35, No. 1399 Jiasong Middle Road, Qingpu District, Shanghai, China
 
Tel: +86 21 50496068  /  +86 21 50496058  /  +86 400 9980 919
Mobile: +86-137 6133 5725 (As WeChat)
             +86-195 1652 8308
             +86-189 6407 9542
E-mail: joinsun@jstianyi.com.cn
             airport.gse@jstianyi.com.cn
Copyright © Jiangsu Tianyi Aviation Industry Co., Ltd. All Rights Reserved. Sitemap